EasyManua.ls Logo

ScanCool SHC 2000 - Safety Installations (IEC 61010-2-010); Excess Temperature Protection; Low Liquid Level Protection; Environmental Conditions (IEC 61 010-1)

ScanCool SHC 2000
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SHC 2000
8
Safety installations according to IEC 61010-2-010:
Excess temperature protection adjustable from 0 °C ... 170 °C
Low liquid level protection float switch
Classification according to DIN 12876-1 class III
Alarm message optical + audible (permanent)
Environmental conditions according to IEC 61 010-1:
Use only indoor.
Altitude up to 2000 m - normal zero.
Ambient temperature: +5 ... +40 °C (for storage and transportation)
Air humidity:
Max. rel. humidity 80 % for temperatures up to +31 °C,
linear decrease down to 50 % relative humidity at a temperature of +40 °C
Protection class according to IEC 60 529 IP21
Power supply: corresponds to Class I; according to VDE 0106 T1
not for use in explosive atmosphere
Max. mains fluctuations of ±10 % are permissible.
Overvoltage category II
Pollution degree 2
Standards for interference resistance
EN 61326: 1997 + A1: 1998 + A2: 2001 + A3: 2003
Emitted interferences
The unit adheres to the threshold values for emitted interferences
according to table 3.
Interference resistance
The unit conforms to the requirements according to table B.1.