Scansonic R3 - General Information and Safety; Safety Instructions; Unplugging Scenarios; Disclaimer

3
3
Safety instructions
Please store this instruction manual for future
reference.
• Place the unit on a solid surface
• Do not expose Scansonic R3 to high
humidity, direct sunlight, dirt, heavy vibration
or extreme temperatures.
• Do not open the cabinet. Only qualified
technicians are allowed to clean this
Scansonic radios internal parts.
• If service or repair is required, this must also
be done be qualified technicians.
• Use a duster or a slightly damp, soft and
non-fluffy rag to clean the cabinet. Do not
use corrosive or strong cleaning agents.
• Make sure no liquids or moisture penetrates
the radio during the cleaning. Unplug the
radio before cleaning it.
Unplug the radio in following cases:
• Foreign objects or liquids has penetrated
the radio
• The radio cannot be operated properly.
• The cabinet has be damaged.
• The mains plug or the mains cable is
defective.
• If the radio is not to be used for a long time.
Information
Disclaimer
Despite our best efforts we cannot guarantee that the technical data indicated are correct, complete
and updated. We, Scansonic, reserve the right to make technical changes without notice.
Congratulations on your new radio.
Please take a moment to read this manual.
Enjoy