Scansonic R3 - Operating Your Radio - FM; Display Modes - FM

8
3
01 Carefully extend the telescopic antenna.
02
Press ON/OFF to power on the radio (note that the radio automatically starts in DAB mode).
03 Press MODE button to select FM mode.
04 Press AUTO button briefly to automatically scan upwards.
05 Press AUTO button 2 seconds to automatically scan downwards.
06 Turn the ROTARY knob to tune and adjust the frequency manually, steps 0,05MHz
07 Press and hold 1-4 buttons to save favourite stations.
Your radio has four different modes which can be selected by pressing the INFO button.
01 Radiotext display text messages such as artist, next artist, station ads etc
02 Genre display the type of the selected station; Pop, Rock, News, Jazz etc.
03 Date display shows the current date and time
04 Frequency display the frequency of the selected station
Note that these FM display mode informations are only available when the radio is able to receive RDS
information from the broadcaster.
Operating your radio - FM
Display modes - FM