Sceptre X405BV User Manual (English)

Questions and Answers:

T
Tyler SanchezSep 8, 2025
What to do if Sceptre Monitor remote control does not work?
- B
  Benjamin ScottSep 8, 2025
  If your Sceptre Monitor remote control isn't working, try these steps: turn off the monitor and unplug it. Remove the batteries from the remote for 30 seconds, then press the remote buttons and the power button randomly for about 2 seconds before reinstalling the batteries. Also, ensure there's a clear line of sight between the remote's front sensor and the monitor's remote sensor, which is located in the same place as the power indicator light.
N
nathan74Aug 23, 2025
Why is there picture but no audio on my Sceptre Monitor?
- B
  Brandon SmithAug 23, 2025
  If you have picture but no audio on your Sceptre Monitor, first ensure the audio cable is properly connected. Then, readjust the volume using the remote control. Also, ensure that the display's tuner signal is at least 65%.
C
cohensharonAug 25, 2025
How to brighten picture on Sceptre X405BV?
- T
  Tracy GeorgeAug 26, 2025
  If the picture on your Sceptre Monitor is too dark, adjust the contrast, brightness, and lamp settings using the OSD Menu.
E
Elizabeth HernandezAug 26, 2025
How to make picture fill screen on Sceptre X405BV?
- J
  jenniferbonillaAug 26, 2025
  If the picture on your Sceptre Monitor doesn't cover the entire screen: * If using HDMI or a digital channel, use the ASPECT button to switch to 16:9 format. * If using VGA, use the AUTO ADJUST function. * If you are using regular analog Display, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 to fill the screen.
B
Benjamin OliverAug 27, 2025
How to get 1920x1080 resolution on Sceptre X405BV PC VGA?
- D
  Dr. Christopher Lopez MDAug 27, 2025
  To achieve 1920x1080 resolution on your Sceptre Monitor via PC VGA, ensure the monitor is recognized as a plug and play monitor. Try updating your video card's drivers. If the issue persists, you may need to upgrade your video card.
R
Ryan PageAug 29, 2025
What to do for weak signal on Sceptre X405BV?
- L
  lopezkellyAug 29, 2025
  If you are experiencing a weak signal or seeing a 'no program' symbol on your Sceptre Monitor, ensure that the TV’s tuner signal is at least 65%. Try changing the direction of your antenna and rescan your channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
E
Eric OlsonSep 10, 2025
Why is there audio but no picture on my Sceptre Monitor?
- E
  Evan ArcherSep 10, 2025
  If you're getting audio but no picture on your Sceptre Monitor, verify that both your video and audio cables are securely connected. Additionally, make sure the TV’s tuner signal is not lower than 65%.
M
Mary WoodsSep 7, 2025
How to remove big black box on Sceptre Monitor?
- Z
  zellisSep 7, 2025
  The big black box in the middle of the screen on your Sceptre Monitor indicates that closed captioning is turned on and set to TEXT1 – TEXT4. Change the setting to CC1, or turn off closed captioning to remove the box.
D
diazdeniseSep 4, 2025
Why does Sceptre Monitor turns on slowly?
- J
  Juan SullivanSep 4, 2025
  Your Sceptre Monitor uses a High Definition liquid crystal display panel. These panels typically require a few more seconds to power up and display the picture compared to normal displays.
K
Kyle CookSep 5, 2025
Why does my Sceptre X405BV Monitor turn off after 10 minutes?
- J
  Janice McfarlandSep 6, 2025
  Your Sceptre Monitor features a power-saving mode that automatically turns off the display if no signal is provided for more than 10 minutes.