How to adjust letterbox content on Sceptre X322BV-SR Monitor?
Letterboxed (Widescreen) versions of DVD movies are most commonly formatted for standard 4:3 TVs. The Sceptre display can expand this content so the entire screen is filled. To use this function press the aspect button on the remote control and cycle among the available options.
What to do if my Sceptre monitor has picture but no sound?
If your Sceptre monitor displays a picture but has no audio, first ensure that the audio cable is securely connected. Then, readjust the volume using the remote control. Also, make sure that the TV’s tuner signal is not lower than 65 %.
How to brighten a dark picture on Sceptre X322BV-SR Monitor?
If the picture on your Sceptre monitor is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
How do I make the picture fill the screen on my Sceptre X322BV-SR?
If the picture on your Sceptre monitor doesn't cover the entire screen, and you’re using HDMI or a digital channel, use the ASPECT button to switch to 16:9 format. If you are using VGA, use the AUTO ADJUST function to adjust to the screen. If you are using regular analog channel, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 in order to fill up the screen.
Why doesn't my cell phone work with MHL on my Sceptre monitor?
Check if you connected to HDMI2 since ONLY HDMI2 works with MHL. If it still doesn’t work make sure you have the correct MHL cable (some have more pins than others). Ultimately, please consult your cell phone manufacturer for compatibility issues.
Why doesn't my Sceptre X322BV-SR scan digital cable channels?
This Sceptre display only supports digital antenna signal and analog cable signal. This display does not support QAM.
What is the universal remote code for a Sceptre X322BV-SR Monitor?
This Sceptre television follows SONY’s universal remote code. To find the actual code you must read through your own universal remote’s guide book.
Where can I find the universal remote code for my Sceptre monitor?
This Sceptre display follows SONY’s universal remote code. Please check your hand book for SONY’s codes then apply them.
How to get sound on Sceptre X322BV-SR Monitor from PC?
If there is no sound on your Sceptre monitor when connected to a PC, ensure that you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the display’s VGA STEREO INPUT.
Why can't my Sceptre X322BV-SR receive enough channels?
If your Sceptre monitor cannot receive sufficient channels through the ATSC/NTSC tuner, the display’s optional tuner signal must not be lower than 65 %. Change the direction of your antenna and rescan your channels. If you have cable services, contact your cable company to inquire about the signal strength of your local cable.
Essential warnings and cautions for safe product operation and to prevent hazards.
Guidance on protecting the display from voltage surges, static charges, and lightning.
Detailed guidelines on safe installation, operation, and maintenance to prevent hazards.
Allows adjustment of display picture parameters like tint, contrast, and sharpness.
Configures advanced picture features like Dynamic Contrast, Film Mode, and Noise Reduction.
Adjusts sound modes, bass, treble, and balance for optimal audio output.
Manages parental controls, password changes, and source/keypad locks.
Outlines SCEPTRE's warranty coverage, responsibilities, and required customer actions.
Details the process for obtaining warranty service, including contact information and procedures.
Specifies what is not covered by the warranty and details policies like dead pixel limits.
To Next Page
General
