Why Sceptre Monitor video is black and white under YPBPR?
If your video is black and white under YPbPr on your Sceptre monitor, ensure you are not using a yellow video cable connected to the YPbPr's green port.
What to do if Sceptre Monitor has picture but no sound?
If your Sceptre monitor displays a picture but has no audio, ensure the audio cable is securely connected. You may also need to readjust the volume using the remote control. Also, the display’s tuner signal must not be lower than 65 %.
What to do if Sceptre U Series has audio but no picture?
If your Sceptre monitor has audio but no picture, ensure that both your video and audio cables are correctly connected. Also, the display’s tuner signal must not be lower than 65 %.
How to brighten the picture on Sceptre Monitor?
If the picture on your Sceptre monitor is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
Why Sceptre U Series turns on slowly?
The Sceptre display turns on or off slowly because it is an Ultra High Definition liquid crystal display panel, which requires a few more seconds than normal TVs to power up and display the picture.
How to unblock channels on Sceptre U Series?
If TV channels are blocked on your Sceptre monitor, check the auto lock function’s settings within the OSD. You may have inadvertently locked some channels.
Why Sceptre U Series Monitor remote control does not work?
If the remote control for your Sceptre monitor isn't working, try these steps: First, turn off the display and unplug it. Remove the batteries from the remote for 30 seconds, then press the remote buttons and the power button randomly for about 2 seconds before reinstalling the batteries. Check if there is a clear line of sight between the remote control's front sensor and the remote sensor on the display, as the sensor is located near the power indicator light.
Why Sceptre U Series Monitor cannot receive sufficient channels?
If you cannot receive sufficient channels on your Sceptre monitor through the ATSC/NTSC tuner, change the direction of your antenna and rescan the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
Why Sceptre U Series volume changes when switching channels?
Switching channels or sources may change the volume on your Sceptre monitor because different channels have varying signal volume levels. Ensure the auto volume function is enabled.
How to improve Sceptre U Series picture quality?
To improve picture quality on your Sceptre monitor, view HD widescreen programs when possible. If HD content is not available, view 'Standard Definition' from a digital source.
Guidelines for grounding external television antennas to protect against voltage surges.
Measures to protect the display during lightning storms or periods of non-use.
General| Series | U Series |
|---|---|
| Built-in Speakers | Yes |
| Response Time | 5ms |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 300 cd/m² |
| Viewing Angle | 178°(H)/178°(V) |
| Connectivity | HDMI, DisplayPort, VGA |
| VESA Mount | 100x100mm |
To Next Page
