EasyManua.ls Logo

Sceptre E27 - User Manual

Sceptre E27
39 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
- 1 -
www.SCEPTRE.com
SCEPTRE E27 Display User Manual
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating, and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for prolonged
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

Table of Contents

Other manuals for Sceptre E27

Preview: User Guide
User Guide34 pages

Questions and Answers

  • R
    ryanbernardSep 10, 2025
    Why I do not hear any sound from Sceptre E27 speakers?
    • S
      Sarah NelsonSep 10, 2025
      If you do not hear any sound from the speakers of your Sceptre Monitor, check your 3.5 mm mini-jack cable to ensure it is properly connected between the computer and the monitor. Also, verify the volume levels on both your computer and the monitor.
  • K
    Kelly SparksAug 22, 2025
    How to fix incorrect resolution on Sceptre Monitor?
    • L
      Louis CarterAug 23, 2025
      If you cannot get the correct resolution on your Sceptre Monitor, rebooting your computer might solve the problem. The issue might be that your video card is not reading the monitor correctly. Also, ensure that your video card drivers are up to date.
  • C
    Carol WadeAug 25, 2025
    How do I reset my Sceptre E27 Monitor?
    • F
      florescherylAug 25, 2025
      To reset your Sceptre Monitor, ensure it has a valid video signal. Press the menu button to open the OSD (On-Screen Display). Look for the 'RESET' option under the 'SYSTEM' menu.
  • J
    Joshua WeberAug 26, 2025
    Why is my Sceptre E27 Monitor too bright?
    • D
      David GilesAug 27, 2025
      If the video on your Sceptre Monitor is too bright even after adjustments, try lowering the contrast and increasing the brightness to compensate. This issue might occur because newer LCDs with HD video capability may not be fully compatible with older video cards.
  • P
    pattersonbrittanyAug 27, 2025
    Why are the colors not correct on my Sceptre Monitor?
    • R
      Ronald RobertsAug 28, 2025
      If the colors on your Sceptre Monitor are not displaying correctly, the issue might stem from a loose or faulty DVI, DP, or HDMI cable. Try reconnecting the cable securely. If the problem continues, replace the current cable with a new one to see if it resolves the color issue.
  • L
    Lisa HowardAug 29, 2025
    Why are the words blurry on my Sceptre E27?
    • C
      cameronbillyAug 29, 2025
      If the words and video appear blurry on your Sceptre Monitor, ensure you are using the monitor's native resolution of 1920 x 1080 at 60Hz. If the problem persists, try enabling or disabling the CLEAR TYPE function in Windows.
  • S
    smithkristenSep 18, 2025
    Why can’t I get to the image option under the OSD of my Sceptre E27?
    • P
      peterpetersenSep 18, 2025
      If you cannot get to the image option under the OSD on your Sceptre Monitor, make sure you are using a VGA video connection. This option is disabled for DVI or HDMI connections because it only adjusts analog signals.
  • B
    Brian RobertsSep 12, 2025
    Why is the video too bright on Sceptre Monitor?
    • A
      Alicia HopkinsSep 12, 2025
      If the video is too bright on your Sceptre Monitor, even after adjustments, it might be due to older video cards not being fully compatible with newer LEDs. Try lowering the contrast and increasing the brightness to compensate.
  • M
    Michelle AguilarSep 8, 2025
    How to fix blurry words and video on Sceptre E27 Monitor?
    • L
      lopezjillSep 8, 2025
      If the words and video are too blurry on your Sceptre Monitor, ensure you are using the monitor’s native resolution of 1920 x 1080 at 60 Hz. If you are using VGA, remember to AUTO ADJUST. If the words are still blurry, try enabling or disabling the CLEAR TYPE function in Windows.
  • J
    Judith Turner DDSSep 5, 2025
    What to do if my Sceptre Monitor says “Signal Out of Range”?
    • K
      kevin81Sep 5, 2025
      If your Sceptre Monitor says “SIGNAL OUT OF RANGE”, and you have a CRT monitor, connect it to the computer and lower the refresh rate to 60 Hz via your video card’s display settings. If you don't have a CRT monitor or it's broken, turn off both the monitor and your computer. Turn them back on, and as the computer starts, repeatedly press the “F8” key until a selection menu appears. Choose the “Safe Mode” option. In Safe Mode, uninstall any video card and monitor drivers using “Add / Remove Programs” or through “System Properties”, removing entries under “Monitors” and “Display Adapters”. Reboot your computer, reinstall the monitor driver first, then the video card driver, ensuring the refresh rate is set to 60Hz.

Summary

SAFETY INSTRUCTIONS

IMPORTANT INFORMATION

Opening the Package

Installation

Installing the Monitor Stand Assembly

Guide for attaching the monitor stand neck and base.

Wall Mounting

Instructions for preparing the monitor for wall mounting.

Identifying Front and Rear Panel

Front View

Details the monitor's front view and indicator light status.

Rear View with Buttons

Describes the buttons on the rear of the monitor and their functions.

Panel Tilt Adjustment

Instructions for adjusting the monitor screen's forward and backward tilt.

Rear View with Connections

Identifies the various input/output ports on the rear of the monitor.

Connections

HDMI Connection Guide

Steps for connecting the monitor using an HDMI cable.

DisplayPort Connection Guide

Steps for connecting the monitor using a DisplayPort cable.

Type-C Connection Guide

Steps for connecting the monitor using a Type-C cable.

On Screen Display (OSD) Menu

QUICK START

PICTURE

COLOR

SYSTEM

Supported Video (DisplayPort) Resolution

Supported Video (HDMI) Resolution

Supported Video (Type-C) Resolution

Troubleshooting

How do I detach the DisplayPort Cable?

How do I clean the monitor?

Specification

LIMITED PRODUCT WARRANTY

Disclaimer, Trademarks, Icons & Copyright Information

FCC Compliance Statement

Sceptre E27 Specifications

General IconGeneral
Screen Size27 inches
Refresh Rate75Hz
Response Time5ms
Brightness250 cd/m²
Aspect Ratio16:9
PortsHDMI, VGA
Contrast Ratio1000:1
Color Gamut72% NTSC
Resolution1920 x 1080 (FHD)
Viewing Angle178° (Horizontal/Vertical)

Related product manuals