Sceptre E27 - Type-C Connection Guide

- 18 -
www.SCEPTRE.com
SCEPTRE E27 Display User Manual
If You have Type-C Connection on Your Video Card…
1. Make sure the power of the E27 LED MONITOR is turned off.
2. Obtain a Type-C cable and connect one end to the back of the monitor
and the other end to the back of the computer.
3. For audio, you can plug in a set of headphones or speakers into the
headphone jack.
4. Turn on the power of both the E27 LED MONITOR and the computer.
Please Note:
• Type-C supports Adaptive Sync only.
• Type-C supports up to 100Hz refresh rate.
• At the optimal resolution of 1920 x 1080, the maximum support
refresh rate is 100Hz for Type-C.