To Next PageTo Next PageWhy does my Sceptre Monitor have no picture?
If your Sceptre monitor displays no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify that the video cable is properly connected. Select the appropriate input signal source using the source button to match your cable connection.
What to do if Sceptre Monitor picture only no audio?
If your Sceptre monitor shows a picture but has no audio, first ensure the audio cable is connected properly. Next, readjust the volume using the remote control. Also, confirm that the display’s tuner signal is not lower than 65%.
What to do if Sceptre E165 Monitor picture is too dark?
If the picture on your Sceptre monitor is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
Why does my Sceptre E165 Monitor show a weak signal?
If your Sceptre monitor displays a weak signal or the 'no program' symbol, ensure that the TV’s tuner signal is not lower than 65%. Change the direction of your antenna and rescan the channels. If you are using cable, contact your cable company to ask about the signal strength of your local cable.
How to get sound on PC to play on Sceptre E165 Monitor?
To get sound on your PC to play through your Sceptre monitor, ensure you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the display’s VGA STEREO INPUT.
Why does my Sceptre HDCP video have no audio?
If your HDCP video has no audio on your Sceptre monitor, ensure you have a 3.5 mm mini-jack cable connected from your HDCP video device’s sound output to the display’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain an RCA audio converted into a 3.5 mm mini-jack cable.
Why can't I get 1360x768 resolution on PC VGA with my Sceptre E165?
If you cannot get 1360x768 resolution on PC VGA with your Sceptre monitor, ensure the display is recognized as a plug and play monitor. Try updating your video card’s drivers. If that does not help, you may need to upgrade your video card to a newer one.
Why is the remote control not working on my Sceptre Monitor?
If the remote control for your Sceptre monitor isn't working, turn off the display and unplug it from the socket. Remove the batteries from the remote for 30 seconds, then press the remote buttons and the power button randomly for about 2 seconds before reinstalling the batteries. Ensure there is a clear line of sight between the remote control's front sensor and the display's remote sensor, which is located in the same place as the power indicator light.
What to do if my Sceptre E165 Monitor has abnormal colors?
If your Sceptre monitor is displaying abnormal colors, ensure that the colors on the cables match the ports on the back of the television, for example, connect the red cable to the red colored port.
How to get more channels on my Sceptre E165 Monitor?
If you cannot receive sufficient channels through the ATSC/NTSC tuner on your Sceptre monitor, ensure that the TV’s tuner signal is not lower than 65%. Try changing the direction of your antenna and rescanning the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
General| Screen Size | 15.6 inches |
|---|---|
| Resolution | 1366 x 768 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 500:1 |
| Built-in Speakers | Yes |
| Brightness | 200 cd/m2 |
| Ports | HDMI, VGA |
| Viewing Angle | 90° horizontal, 65° vertical |
| Input Connectors | VGA, HDMI |
Essential guidelines for safe installation, operation, and maintenance of the display.
Details on antenna connection protection, lightning, and power line safety.
Instructions for unpacking the display and listing included accessories.
Guidance on proper placement, ventilation, and mounting of the display.
Locating and understanding the display's indicator light, sensor, and mounting pattern.
Explanation of buttons located on the display's side panel for operation.
Details on various ports for connecting external devices like video and audio.
Overview and functions of the SCEPTRE remote controls.
Guidance on connecting various devices like antennas, DVD players, PCs, and consoles.
How to select and cycle through different input sources.
Using OSD menus with remote and side buttons for adjustments.
How to connect USB flash drives for media playback and updates.
Guidelines for handling discs and operating the DVD player.
How to connect mobile devices for display and charging via MHL.
Instructions for cleaning the display screen and remote.
Common problems and their solutions for display issues.
Technical specifications, warranty details, and contact information.
