To Next PageTo Next PageWhy I cannot change the time manually on my Sceptre TV?
Your Sceptre TV syncs time automatically according to your local TV channel. This function only works while the TV’s tuner is connected to an ANTENNA.
Why is there picture but no audio on my Sceptre TV?
If you see a picture but hear no sound on your Sceptre TV, first, check that the audio cable is securely connected. Next, readjust the volume using the remote control. Also, the TV’s tuner signal must not be lower than 65 %.
What to do if my Sceptre TV remote control does not work?
If your Sceptre TV remote isn't working, try these steps: Turn off the TV, unplug it, and remove the batteries from the remote for 30 seconds. Press the remote buttons and the power button randomly for 2 seconds, then reinstall the batteries. Also, ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located near the power indicator light.
What to do if there is audio but no picture on my Sceptre TV?
If you are getting audio but no picture on your Sceptre TV, ensure that both your video and audio cables are properly connected. Also, the TV’s tuner signal must not be lower than 65 %.
How to remove big black box in the middle of Sceptre TV screen?
The big black box in the middle of your Sceptre TV screen indicates that closed captioning is turned on and set to TEXT1 – TEXT4. Change the setting to CC1 or turn off closed captioning to remove the box.
Why I can’t open the OSD on my Sceptre E24?
You need to have a valid video signal going through the Sceptre monitor before you can turn on the OSD.
How to unblock channels on Sceptre TV?
If channels are blocked on your Sceptre TV, check the auto lock function’s settings within the OSD. You may have inadvertently locked some channels.
What is the universal remote code for Sceptre TV?
This Sceptre TV follows SONY’s universal remote code. Please check your handbook for SONY’s codes then apply them.
Why I can’t get to the image option under the OSD of my Sceptre E24?
Ensure you are using a VGA video connection with your Sceptre monitor. The IMAGE option in the OSD is disabled when using DVI or HDMI connections because it only adjusts analog signals.
Why I do not hear any sound from the speakers of my Sceptre E24?
If you're not hearing sound from your Sceptre monitor's speakers, first check the 3.5 mm mini-jack cable connection between your computer and the monitor. Then, verify the volume levels on both your computer and the monitor itself.
General| Screen Size | 24 inches |
|---|---|
| Refresh Rate | 75Hz |
| Response Time | 5ms |
| Brightness | 250 cd/m² |
| Ports | HDMI, VGA |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Resolution Type | FHD |
| Viewing Angle | 178° (H) / 178° (V) |
| VESA Mount Compatible | Yes (75 x 75mm) |
Guidelines for grounding antennas to protect against surges and static charges.
Unplug TV during storms or long periods of inactivity for added protection.
Avoid locating antennas near overhead light or power circuits.
Lists all items included with the SCEPTRE E24 HDTV.
Instructions for setting up the HDTV, including placement and ventilation.
Identifies the front components, indicator light, and remote sensor.
Details VESA mounting specifications and recommended screw size.
Connect digital cable without a cable box or antenna to the TV.
Connect a cable box using YPbPr component cables for video and audio.
Connect a Wii console using composite AV cables for video and audio.
Connect satellite boxes using an HDMI cable for digital audio and video.
Connect a PC using a VGA cable and 3.5mm audio jack.
Steps to turn on the HDTV and select the correct source.
Initial setup process for antenna or cable connections.
Using remote control buttons for OSD navigation and selection.
Using the TV's physical buttons for OSD navigation.
Overview of OSD picture settings like brightness, contrast, color, tint.
Adjusts picture quality settings: mode, brightness, contrast, color, tint, sharpness.
Adjusts PC input settings: auto-adjust, position, clock, phase.
Details dynamic contrast, film mode, and noise reduction options.
Overview of sound settings: surround, analog/digital sound, equalizer.
Adjusts balance, surround, analog/digital sound, and AVL settings.
Enables internal equalizer for sound adjustment options.
Manages channel lists, favorite channels, and associated settings.
Configures channel number, label, signal type, and auto scan.
Locks features and blocks content based on ratings (V-Chip).
Manages password, keypad lock, and source lock functions.
Configures closed captioning display, type, and style for subtitles.
Adjusts menu language, time zone, and clock settings.
Sets the duration the OSD menu remains visible on screen.
Configures blue background display and auto power off features.
Resets all menu options back to their default values.
Connect USB drives for music and picture playback.
Navigating and selecting music or photo files from USB.
Adjusts slideshow interval, effects, repeat, and music playback.
Lists USB port limitations and supported file types.
Explains using ratings to block unwanted content by age level.
Defines TV ratings like TV-Y, TV-Y7, TV-G, TV-PG, TV-14, TV-MA.
Steps to add desired channels to the favorites list.
Steps to remove channels from the favorites list.
How to view and navigate the favorites list.
Instructions for cleaning the TV bezel and remote control.
Safe methods for cleaning the LCD screen without damage.
Details audio settings, tuner, sleep timer, and PC timing.
Covers signal types, closed captioning, and input/output ports.
Outlines SCEPTRE's warranty obligations for parts and labor.
Procedures for obtaining service and packaging instructions.
Lists items and conditions not covered by the warranty.
Defines dead pixel limits and owner's warranty date responsibilities.
