Sceptre E24 - Connecting Satellite Boxes with HDMI

- 20 -
www.SCEPTRE.com
SCEPTRE E24 Series LED HDTV User Manual
Connecting Satellite boxes with HDMI…
1. Make sure the power of HDTV and your set-top box is turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other
end to the HDMI port on the back of your HDTV.
3. Turn on the HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the TV to
switch to HDMI.
Please Note :
• Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
• Sceptre’s HDTV supports SONY’s universal remote code.
Please look up SONY’s codes in your universal remote’s hand
book.