What to do if my Sceptre X46 HDTV picture is distorted?
This issue might be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to a wall, try moving it to another room to see if the problem persists.
How to fix Sceptre HDTV HDMI video with pure static sound?
The TV does not decode Bitstream audio information. Double-check your DVD player or cable/satellite box to ensure that the audio is set up for PCM.
How to fix HDCP video with no audio on Sceptre X46?
Ensure you have a 3.5 mm mini-jack cable connected from your HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain an RCA audio converted into 3.5 mm mini-jack cable.
What to do if my Sceptre X46 remote control does not work?
If the remote control for your Sceptre HDTV isn't working, try these steps: First, turn off the TV, unplug it, and remove the batteries from the remote for 30 minutes. Press the remote buttons and the power button randomly for 2 seconds, then reinstall the batteries. Also, make sure there is a clear line of sight between the remote control's front sensor and the TV's remote sensor, which is located in the same area as the power indicator light.
Why does my Sceptre X46 HDTV have audio but no picture?
If your Sceptre HDTV has audio but no picture, make sure you have connected both your video and audio cables. The TV’s tuner signal must not be lower than 65 %.
General| Screen Size | 46 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Resolution | 1920 x 1080 |
| Inputs | HDMI, Component, Composite, VGA, RF |
| Speakers | 2 x 10W |
Essential guidelines for safe installation, operation, and maintenance of the television.
Guidance on grounding antennas according to electrical codes and protection against lightning.
Details on unpacking the TV, checking package contents, and preparation before use.
Explains front view indicators, side control buttons, and rear connection ports.
Information on selecting the right port, understanding cable types, and switching sources.
Step-by-step guides for connecting antennas, cables, DVD players, game consoles, and PCs.
Instructions for powering on the TV and scanning for channels using antenna or cable.
How to use the TV's menu system via remote or side panel buttons for adjustments.
Guides for adjusting picture modes, backlight, brightness, contrast, and sound settings.
Explains parental controls, caption settings, date/time, sleep timers, and PC setup.
Proper methods for cleaning the TV screen, bezel, and remote control.
A guide to resolving common issues with picture, sound, remote control, and signal reception.
Information on how to get technical support and customer service.
Detailed list of the TV's display panel, TV display, function, and I/O specifications.
Details on warranty coverage, terms, exclusions, trademarks, and FCC compliance.
To Next Page
