To Next PageTo Next PageHow to get sound on PC through Sceptre X505BV-FHD HDTV?
To get sound on your Sceptre HDTV from a PC, ensure a 3.5 mm mini-jack cable is connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
What to do if Sceptre X505BV-FHD HDTV remote control does not work?
If the remote control for your Sceptre HDTV isn't working, turn off the TV and unplug it. Remove the batteries from the remote for 30 minutes. Press the remote buttons and the power button randomly for a couple of seconds, then reinstall the batteries and check if it functions. Also, ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located near the power indicator light.
What to do if my Sceptre HDTV cannot receive sufficient channels?
If your Sceptre HDTV isn't receiving enough channels through the ATSC/NTSC tuner, it might be because the TV’s tuner signal must not be lower than 65 %. Try changing the direction of your antenna and then rescan for channels. If you're using cable, contact your cable company to inquire about the signal strength of your local cable.
How to fix HDCP video with no audio on Sceptre X505BV-FHD?
To resolve the issue of no audio with HDCP video on your Sceptre HDTV, ensure a 3.5 mm mini-jack cable is connected from your HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need an RCA audio converted into 3.5 mm mini-jack cable.
Why is there no picture on my Sceptre X505BV-FHD?
If your Sceptre HDTV shows no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify the video cable is properly connected. Select the correct input signal source using the source button, ensuring it matches the cable connection.
What to do if my Sceptre X505BV-FHD HDTV has audio but no picture?
If your Sceptre HDTV has audio but no picture, verify that both your video and audio cables are connected properly. Also, ensure that the TV’s tuner signal is not lower than 65 %.
Why is picture quality horrible on my Sceptre HDTV?
For the best image quality on your Sceptre HDTV, view HD widescreen programs whenever possible. If HD content isn't available, opt for 'Standard Definition' from a digital source. Standard analog TV will always appear noticeably inferior to HD because your TV's superior video capabilities reveal interference and deficiencies that were previously unnoticed.
What to do if Sceptre HDTV HDCP video says no HDCP support?
If your Sceptre HDTV HDCP video displays a 'no HDCP support' message, reboot your HDCP video device by turning it off and unplugging the power cord. Wait for about 8 minutes before plugging the power cord back in to see if it resolves the issue.
Why does my Sceptre X505BV-FHD turns on slowly?
Your Sceptre HDTV, being a High Definition liquid crystal display panel TV, requires slightly more time than traditional TVs to power on and display the picture.
What to do if Sceptre HDTV picture is too dark?
If the picture on your Sceptre HDTV is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
General| Screen Size | 50 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Display Type | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| VESA Wall Mount Compatibility | Yes |
| VESA Mount Pattern | 200 x 200 mm |
| Backlight Technology | LED |
Essential guidelines for safe operation, installation, and maintenance of the SCEPTRE HDTV.
Instructions for setting up the HDTV, including placement and ventilation requirements.
Guide on how to insert AAA batteries into the remote control for operation.
Initial steps to power on the TV and connect AV devices correctly.
Guide for initial setup when connecting an antenna or cable without a box.
Explains how to use remote control buttons to navigate the OSD menu.
Details how side panel buttons function for OSD navigation and adjustments.
Adjusts picture settings like tint, contrast, and sharpness for optimal viewing.
Modifies sound settings such as treble, bass, and audio enhancements.
Manages tuner functions, including channel scanning and editing.
Enables filtering of TV programs and movies based on content ratings.
Configures miscellaneous options like language, time, and caption styles.
Provides options for resetting the TV and managing power-saving features.
Adjusts the aspect ratio and display size for optimal picture fit.
Optimizes picture settings specifically for PC input signals.
Modifies the color temperature for a warmer, neutral, or cooler picture.
Adjusts audio modes, bass, treble, and balance for sound customization.
Configures advanced sound features like AVL, speaker output, and digital audio.
Allows manual adjustment of sound frequencies or selection of presets.
Enables SRS TruSurround HD for enhanced audio effects and clarity.
Displays all scanned channels currently available on the TV.
Allows users to create and manage a list of preferred channels.
Provides options for channel numbering, labeling, and skipping.
Selects between antenna (Air) and cable input sources for tuning.
Automatically scans for and tunes all available channels.
Sets a password to access and manage parental control features.
