Page 15
3. On receipt of your device
3.1 Taking the device out of its packaging
• Take the device out of its packaging.
• Next, make sure that it is not damaged and that no parts are missing.
3.2 Making sure that all of the components have been included
Make sure that all of the components have been included by checking the package
contents against the following list:
3.2.1 Scope of supply
• humimeter RH2
• Water activity measuring chamber
• 4 pieces of twist-off lids
• 2 pieces of screw-top jars 186ml
• 2 pieces of screw-top jars 245ml
• Calibration ampoules (art.no. 10005)
• 4 pieces of AA Alkaline batteries
• Rubber protection cover
• Plastic case
• Operating manual
Optional accessories:
• Replacement set with 14 pieces of screw-top jars 168ml with twist-off lid
• Replacement set with 14 pieces of screw-top jars 245ml with twist-off lid
• 14 pieces of plastic containers 200ml (PET) with twist-off lid
• Calibration ampoules - for checking the calibration of the humimeter RHx series
• humimeter USB data interface module - USB flash drive with software and USB
cable
• Battery operated portable thermal printer (only possible together with humimeter
USB data interface module) - Described in a separate operating manual
• Bluetooth module - Described in a separate operating manual
• Wall holder, mounted on humimeter RH2
To Next Page
