6 Situation: 18.07.2005 SDT-0018-02EN
Instruction Manual Control and Switch Panel DT 201 B
Spare cylinder (optional) For additional equipment Truma Duomatic L plus:
The spare cylinder symbol is displayed when one of the two gas cylinders is
empty.
The spare cylinder symbol flashes if the second gas cylinder is also empty.
The "ALARM" message appears in the basic display.
For additional equipment Truma Triomatic:
The spare cylinder symbol is displayed when the gas cylinder in use is empty.
Defroster (optional) For additional equipment Truma Duomatic L or Truma Triomatic:
The "Eis-Ex" (defroster) symbol is displayed when the defroster unit is
switched on.
Step The step symbol is displayed when the step is extended.
Before commencing the journey, the step must be retracted.
If the step is extended and the engine is started, a loud warning signal is emit-
ted and the buzzer symbol appears on the display.
If the sensors are defective or if the D+ signal is missing, the warning signal
can fail. Before commencing the journey, the driver must therefore check if
the step is retracted.
5.2.1 Checking the temperatures
Basic display button Press the basic display button twice briefly.
The inside and outside temperatures are indicated on the 2nd page of the
basic display. The display range is between -40 °C and +60 °C.
W
For more information, see the instruction manual for the additional equip-
ment.
W
Before commencing the journey, check if the step is retracted.
W
For more information, see the section 5.7.
W
If no button is pressed for 20 seconds, the system automatically switches
back to the basic display that is not illuminated.
To Next Page
Loading...
Need help?
General