Schaudt EBL 101 D User Manual

Date: 29.04.2010
E Schaudt GmbH, Elektrotechnik und Apparatebau, Daimlerstraße 5, 88677 Markdorf, Germany, Tel. +49 7544 9577-0, Fax +49 7544 9577-29, www.schaudt--gmbh.de
811.554 BA / EN
Instruction Manual
Electroblock EBL 101 D
EBL 101 C with OVP
Table of contents
1 Safety information 2......................................
1.1 Meaning of safety symbols 2...............................
1.2 General safety information 2...............................
2 Introduction 3............................................
3 Operation 3..............................................
3.1 Switching system on/off 3..................................
3.2 Changing the battery 4....................................
3.3 Operating faults 6........................................
3.4 Closing down the system 7................................
4 Application and functions in detail 8.........................
4.1 Battery functions 10........................................
4.2 Additional functions 11.....................................
4.3 Use as an exchange device 11..............................
5 Maintenance 11...........................................
Appendix 12..............................................

Schaudt EBL 101 D Specifications

General

Brand	Schaudt
Model	EBL 101 D
Category	Power Supply
Language	English

Summary

1 Safety information

1.1 Meaning of the warning signs

Explains the meaning of DANGER, WARNING, and ATTENTION safety symbols.

1.2 General safety information

Provides general safety guidelines for operating the device, including electrical hazards and hot components.

2 Introduction

3 Operation

3.1 Switching system on/off

Details the procedure for switching the Electroblock system on and off using the main switch.

3.2 Changing the battery

Provides initial information and warnings about changing the battery for the Electroblock.

3.3 Faults

Lists common faults, their possible causes, and remedies for the Electroblock system.

3.4 Closing down the system

Explains the procedure for safely shutting down the Electroblock system for short or long periods.

4 Application and functions in detail

4.1 Battery functions

Details various functions related to battery management, charging, and monitoring.

4.2 Additional functions

Describes specific additional functions like automatic switch for refrigerators and step fuse.

4.3 Use as an exchange device

Explains how the Electroblock can be used as an exchange device for older models.

5 Maintenance

Cleaning

Provides instructions for cleaning the Electroblock device.

Appendix

A EC declaration of conformity

Confirms compliance of Electroblocks with relevant EU directives.

B Special fittings/accessories

Lists special fittings and accessories required for operation and compatibility.

C Customer service

Provides customer service contact details and information on returning faulty devices.

D Fault report

Form for reporting faults and providing device and vehicle information.

E Technical details

Lists technical specifications like mains connection, current consumption, and loading.

F Layout

Diagrams showing the front and rear layout of the Electroblock and its connectors.

G Block diagram/wiring diagram

Detailed block and wiring diagrams illustrating the Electroblock's circuit connections.