Schaudt Electrobloc EBL 262-4 User Manual

Date: 08.07.2019
E Schaudt GmbH, E lektrotechnik und Apparatebau, Planckstraße 8, 88677 Markdorf, Germany, Tel. +4 9 7544 9577-0, Fax +49 7544 9577-29, www.schaudt--gmbh.de
8110265 BA / EN
Instruction Manual
Electrobloc EBL 262-4
Table of contents
1 Safety information 2......................................
1.1 Meaning of safety symbols 2...............................
1.2 General safety information 2...............................
2 Introduction 3............................................
3 Operation 3..............................................
3.1 Starting up the system 3...................................
3.2 Changing the battery 4....................................
3.3 System faults 5..........................................
3.4 Closing down the system 6................................
4 Application and functions in detail 7.........................
4.1 Battery functions 8........................................
4.2 Additional functions 8.....................................
5 Maintenance 8...........................................
Appendix 9..............................................

Schaudt Electrobloc EBL 262-4 Specifications

General

Input Voltage	230 V AC
Output Voltage	12 V DC
Charging Current	18 A
Battery Charging Current	18 A
Battery Type	Lead-acid
Protection	Overload, Short circuit, Reverse polarity

Summary

Safety Information

Meaning of Safety Symbols

Explains the meaning of warning symbols used in the manual for user safety.

General Safety Information

Provides essential safety instructions for the correct and safe operation of the device.

Introduction

Operation

Starting Up the System

Instructions for initial system startup, including battery connection and selector switch settings.

Changing the Battery

Step-by-step guide on how to safely replace the living area battery, including precautions.

System Faults

Troubleshooting guide for common system faults, including fuses and polyswitch protection.

Closing Down the System

Procedures for safely shutting down and disconnecting the system, especially for long periods.

Detailed Application and Functions

Battery Functions

Details on suitable batteries, isolation methods, standby current, and charging characteristics.

Additional Functions

Explains specific functions like refrigerator relay and awning light control, and starter battery charging.

Maintenance

Cleaning

Guidance on how to clean the electrobloc, emphasizing safe cleaning agents and methods.

Appendix

A EC Declaration of Conformity

Confirms the EBL 262-4 design complies with relevant regulations.

B Special Fittings and Accessories

Lists required accessories, specifically the switch panel for operation.

C Customer Service

Provides contact information for customer support and instructions for returning defective devices.

Device Layout

Block Diagram and Connection Diagram