Schaudt Electroblock EBL 252 User Manual

Date: 23.01.2020
E Schaudt GmbH, E lektrotechnik und Apparatebau, Planckstraße 8, 88677 Markdorf, Germany, Tel. +4 9 7544 9577-0, Fax +49 7544 9577-29, www.schaudt--gmbh.de
8110253 BA / EN
Instruction Manual
Electroblock EBL 252
Contents
1 Safety information 2......................................
1.1 Meaning of safety symbols 2...............................
1.2 General safety information 2...............................
2 Purpose 3...............................................
3 Layout 4................................................
4 Operation 5..............................................
4.1 Switching on and off the 12V supply for the leisure area 5......
4.2 Shutting down 5..........................................
4.3 Changing the battery 6....................................
5 Functions 7..............................................
5.1 Battery functions 7........................................
5.2 Additional functions 7.....................................
6 Faults 7.................................................
7 Technical details 9........................................
8 Maintenance 10...........................................

Schaudt Electroblock EBL 252 Specifications

General

Output Voltage	12 V DC
IP Rating	IP20
Input Voltage	230V AC
Battery Type Compatibility	Lead-acid, Gel, AGM
Protection Features	Reverse polarity protection
Cooling	Convection

Summary

Safety information

Meaning of the safety symbols

Explains the meaning of danger, warning, and caution symbols used in the manual.

General safety instructions

Provides general safety guidelines for operating the device and precautions.

Purpose

Modules

Lists the components that make up the EBL 252 electroblock.

System devices

Describes the required external control and display panels for operation.

Protective circuits

Details the protection mechanisms integrated into the electroblock.

Layout

Front layout and connectors

Details the components and connectors on the front of the EBL 252.

Rear layout and connectors

Details the components and connectors on the rear of the EBL 252.

Operation

Switching on and off the 12V supply

Describes how to switch the 12V supply for the leisure area on and off.

Closing down

Explains the procedure for shutting down the system for extended periods.

Changing the battery

Provides instructions and safety precautions for replacing the vehicle's battery.

Functions

Battery charge functions

Explains how the EBL 252 manages charging of different batteries.

Additional functions

Describes extra functions like refrigerator, awning light, and heater control.

Faults

Technical details

Maintenance

Cleaning

Instructions for cleaning the electroblock safely.

Appendix

Customer service

Information on how to contact customer support and send devices for repair.

Fault report

A form for reporting faults and damages to the manufacturer.

EC Declaration of Conformity

Confirms the product's compliance with relevant regulations.

Block diagram