Schenker SMART 60 User Manual

6 – MAINTENANCE (ROUTINE AND SPECIAL) COD: 60S12/24.B.2021
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
38
5. Manually start the watermaker through the
microswitches inside the pump box (switches
down).
6. Leave the unit running for approx. 20 minutes,
checking that the hoses are properly positioned in
the recipient, so that to avoid inhaling air.
7. Manually stop the unit through the microswitches
inside the pump box (switches up) and connect
the original hose..
CAUTION
It is necessary to perform the first start-up procedure when restarting the plant after a shutdown
procedure, in order to purge the air and drain out board the chemicals in the systems.
CAUTION
Avoid inhaling product powders. It is strongly recommended to wear a protective mask during solution
preparation.

Schenker SMART 60 Specifications

General

Brand	Schenker
Model	SMART 60
Category	Water Filtration Systems
Language	English