www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
36
|
GB
The operating instructions contain im-
portant information on how to operate
the machine safely, professionally and
economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to
increase reliability and service life of the
machine.
In addition to the safety regulations in the
operating instructions, you have to meet
the applicable regulations that apply for
the operation of the machine in your coun-
try.
Keep the operating instructions package
with the machine at all times and store it
in a plastic cover to protect it from dirt and
moisture. Read the instruction manual
each time before operating the machine
and carefully follow its information.
The machine can only be operated by
persons who were instructed concerning
the operation of the machine and who are
informed about the associated dangers.
The minimum age requirement must be
complied with.
In addition to the safety notes contained in
the present operating instructions and the
special regulations of your country, the
generally recognized technical rules for
the operation of woodworking machines
must be observed.
We accept no liability for damage or acci-
dents which arise due to non-observance
of these instructions and the safety infor-
mation.
2. Device description
(Fig. A)
1. Motor housing
2. Handle
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschi-
nen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much
enjoyment and success.
Note:
According to the applicable product liabil-
ity laws, the manufacturer of the device
does not assume liability for damages to
the product or damages caused by the
product that occurs due to:
• Improper handling
• Non-compliance of the operating in-
structions
• Repairs by third parties, not by author-
ized service technicians▪Installation
and replacement of non-original spare
parts
• Application other than specied
• A breakdown of the electrical system
that occurs due to the non-compliance
of the electric regulations and VDE reg-
ulations 0100, DIN 57113 / VDE0113
We recommend:
Read through the complete text in the op-
erating instructions before installing and
commissioning the device.
The operating instructions are intended to
help the user to become familiar with the
machine and take advantage of its appli-
cation possibilities in accordance with the
recommendations.
To Next Page
Loading...
Need help?
General
