www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
47
16. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event
of your machine failing to work properly. If you cannot localise and rectify the problem with
this, please contact your service workshop.
Fault Possible cause Remedy
Motor does not start
Failure of mains fuse Check the mains fuse
Extension cable defective Replace defective extension cable
Connections at the motor
or switch out of order
Check with the help of an electri-
cian
Motor or switch defective Check with the help of an electri-
cian
Motor does not work,
the fuse responds
Cross-section of the ex-
tension line is insucient
Refer to Electrical Connection
Overload Check tool
Improper handling of waste equipment
may have negative consequences for
the environment and human health due
to potentially hazardous substances that
are often contained in electrical and elec-
tronic equipment. By properly disposing of
this product, you are also contributing to
the eective use of natural resources.
You can obtain information on collection
points for waste equipment from your
municipal administration, public waste
disposal authority, an authorised body for
the disposal of waste electrical and elec-
tronic equipment or your waste disposal
company.
To Next Page
Loading...
Need help?
General
