www.scheppach.com · service@scheppach.com www.scheppach.com · service@scheppach.com
• Check the product and accessory parts for transport damage. In the event of complaints the carrier must be informed
immediately. Later claims will not be recognised.
• If possible, keep the packaging until the expiry of the warranty period.
• Familiarise yourself with the product by means of the operating manual before using for the rst time.
• With accessories as well as wearing parts and replacement parts use only original parts. Spare parts can be obtained
from your specialist dealer.
• When ordering please provide our article number as well as type and year of manufacture for the product.
m WARNING!
The product and the packaging material are not children’s toys! Do not let children play with plastic bags, lms or
small parts! There is a danger of choking or suocating!
9. Before commissioning
Warning!
Do not use your product until it is completely assembled and installed according to the instructions.
9.1 Charging the battery (Fig. 3)
• When the battery is almost empty, the battery charge status indicator (7) shows one bar (of three). If the pump is
running and stops with a dark display, please charge the battery. Do not attempt to switch the pump on, as this may
damage the battery.
• Switch the pump o at the On/O switch (11).
• Insert the USB-C plug (17) into the USB-C port (4) on the device.
• Connect the USB cable to the mains.
• The voltage indicator (3) illuminates red during the charging process. As soon as the battery is fully charged, the voltage
indicator (3) illuminates green.
• Unplug the USB cable again.
9.2 Fitting the compressed air hose and the adapter set (Fig. 1)
• Screw the compressed air hose connector (16) into the mount (1).
• Screw the required adapter (19, 20, 21) into the mount on the compressed air hose (16).
To Next Page