EasyManua.ls Logo

Scheppach Air Force 4 - User Manual

Scheppach Air Force 4
72 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
1
Air Force 4
Art.Nr.
5906103924
AusgabeNr.
5906103851
Rev.Nr.
16/04/2015
Art.Nr.
5906137901
Ausgabe Nr.
5906137850
Rev.Nr.
05/03/2020
Nachdrucke, auch auszugsweise, bedürfen der Genehmigung. Technische Änderungen vorbehalten. Abbildungen beispielhaft!
DE
Druckluftkompressor
Originalbetriebsanleitung
4-18
GB
Compressor
Translation from the original instruction manual
19-30
FR
Compresseur
Traduction des instructions d’origine
31-43
DK
Luftkompressor
Oversættelse af oprindelige brugsanvisning
44-55
SE
Luftkompressor
Översättning av originalinstruktioner
56-67

Table of Contents

Questions and Answers

  • S
    Sierra AustinJul 28, 2025
    Why my Scheppach Air Force 4 does not start?
    • S
      Sharon HughesJul 28, 2025
      If your Scheppach Air Compressor doesn't start, there could be several reasons: * **No supply voltage:** Check the cable, power plug, fuse, and socket. * **Insufficient supply:** Avoid using extension cables that are too long; use cables with sufficient wire cross-section. * **Low temperature:** Do not operate the compressor when the outside temperature is below +5° C. * **Overheated motor:** Allow the motor to cool down. If necessary, determine and fix the cause of overheating.
  • W
    William GlassAug 8, 2025
    What to do if my Scheppach Air Force 4 starts but the tools don't?
    • M
      michelle48Aug 8, 2025
      If your Scheppach Air Compressor starts, and the pressure gauge shows pressure, but your tools aren't working, it could be due to a leak in the hose connection or the quick-lock coupling. Inspect the compressed air hose and tools for leaks and replace them if needed. Also, check the quick coupling and replace it if necessary.
  • M
    Michael ArmstrongAug 16, 2025
    What to do if Scheppach Air Force 4 Air Compressor starts but there is no pressure?
    • S
      Shawn MurphyAug 16, 2025
      If your Scheppach Air Compressor starts but isn't building pressure, it could be due to a faulty non-return valve or damaged seals. Replace the non-return valve. Check the seals and have any broken seals replaced by a specialist workshop.

Summary

1. Introduction

2. Device description

5. Safety information

Safe work

Detailed safety guidelines for a safe working environment and practices, covering orderliness, environmental influences, and personal protection.

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed air and blasting guns

Specific safety measures for using compressed air tools and blasting guns, including warnings about hot parts and air pressure.

6. Technical data

8. Before starting the equipment

9. Attachment and operation

Mains connection

Instructions on connecting the compressor to the electrical mains supply, including voltage and fuse requirements.

Establishing connections

Using Accessories and Tools

10. Electrical connection

11. Cleaning, maintenance, and storage

13. Troubleshooting

Scheppach Air Force 4 Specifications

General IconGeneral
BrandScheppach
ModelAir Force 4
CategoryAir Compressor
LanguageEnglish

Related product manuals