www.scheppach.com
24
|
GB
13. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Motor does not run
Check whether the plug is plugged in.
Plug the mains plug back in to
the socket.
Check whether there is power to the socket. Call an electrician.
Check whether the vacuum cleaner on/o
switch is switched on.
Switch the on/o switch on.
Reduced vacuuming power
Device blocked? Remove the blockage.
The lter must be cleaned. Clean the lter.
Is the lter full of dust? Remove and empty the lter.
To Next Page
Loading...
