Scheppach DP19Vario User Manual

www.scheppach.com
GB
|
25
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specied
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 2)
1. Machine foot
2. Column
3. Clamping handle
4. Drilling table
5. Motor
6. Speed adjustment lever (handle)
7. V-belt cover
8. Digital display
9. On and o󰀨 switch
10. Handle
11. Folding swarf protector
12. Drill chuck (illustration may di󰀨er)
13. Machine head
14. Laser ON/OFF switch
15. Depth indicator with stop
16. Crank handle
17. Hexagon screw
A. Allen key 4 mm
B. Allen key 3 mm
C. Battery
3. Scope of delivery
• Machine foot 1x
• Column 1x
• Clamping handle 1x
• Drilling table 1x
• Speed adjustment lever 1x
• Handle 3x
• Folding swarf protector 1x
• Chuck 1x
• Machine head 1x
• Crank handle 1x
• M6 hexagonal bolt 4x
• Battery 2x
• Allen key 2x

Scheppach DP19Vario Specifications

General

Drilling	Yes
Chuck type	Keyless
Hammer drilling	No
Adjustable torque	-
Product color	Black, Blue, Red
Idle speed (max)	2580 RPM
Idle speed (min)	440 RPM
Chuck capacity (max)	16 mm
Chuck capacity (min)	1 mm
Drilling diameter in wood (max)	- mm
Input power	550 W

Weight and Dimensions

Depth	730 mm
Width	500 mm
Height	300 mm
Weight	31400 g