www.scheppach.com
16
|
•
work on the machine.
•
voltage.
•
-
tion of the device.
2
.
•
•
• Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
• Do not expose the machine to rain and do not use
the machine in a damp or wet environment.
• Ensure good lighting.
•
gases.
• -
ommended. Tie long hair back in a hair net. Avoid
abnormal posture
•
• -
ed to the mains.
• Keep the workplace free of wood debris and parts
• Disorder in the work area can lead to accidents.
•
touch the tool or the mains cable. Keep such per-
• Personnel working on the machine must not be dis-
tracted.
• -
ing and cleaning work when the engine is switched
- Pull out the mains plug -
• -
justing tools are removed.
•
when leaving the work station.
• -
work is completed.
• -
tion of the manufacturer, as well as the dimensions
• The applicable accident prevention regulations and
observed.
•
• Do not use the cable for purposes for which it is not
intended!
•
• -
• The suction of wood dust and wood chippings in
commercial areas is not permitted.
•
• The manufac-
• -
tions of the manufacturer, as well as the dimensions
•
must also be observed.
• -
been informed of the dangers.
changes to the machine is excluded.
•
accessories from the manufacturer.
5. Safety information
m Attention!
must be observed when using power tools for protec-
reference.
Safe work
•
precautions must be followed to eliminate the risks
• Follow all these instructions before and while work-
ing with the machine.
•
•
contact with earthed parts.
•
place and out of reach of children.
• Keep tools sharp and clean in order to be able to
• -
• -
place them when damaged.
• -
• -
sible when working.
are fatigued.
•
• The use of other insertion tools and other
•
tasks.
To Next Page
Loading...
