To Next Page
P
pjimenezJul 28, 2025
What to do if my Scheppach HC25Si Air Compressor tools do not start?
- VVictoria WilsonJul 29, 2025
If your Scheppach Air Compressor starts, and the pressure gauge shows pressure, but your tools aren't working, it could be due to several reasons. First, the compressed air hose and tools may have a leak and need replacement. Also, the pressure regulator might be set too low; try increasing the pressure using the regulator. Finally, a quick coupling could be leaking, in which case you should contact your local service center and only allow qualified personnel to carry out repairs.
General
