To Next Page
T
Tammie BenderSep 13, 2025
What to do if my Scheppach Air Compressor starts, shows pressure, but the tools don't?
- DdavisjosephSep 13, 2025
If your Scheppach Air Compressor starts and the pressure gauge shows pressure, but your tools aren't working, consider these possibilities: * The hose connections may have a leak. Inspect the compressed air hose and tools and replace if necessary. * A quick coupling may be leaking. Check the quick coupling and replace it if needed. * The pressure regulator may not be set high enough. Increase the set pressure using the pressure regulator.
General
