23
Putting into operation
Attention: Before the first use fill in oil.
HP1100S / HP1300S
Starting the motor: Fig. 3.1, 3.2, 3.3, 3.4
1 Set the choke to ON (with warm motor to OPEN)
2 Open the gasoline tap
3 Move the gas lever to starting position.
4 Set the start switch to ON, forcefully pull the starter
cable
5 Move gas lever to working position, the vibratory plate
starts to work
6 Motor running, slowly open choke
7 Move gas lever to working position
8 Vibratory plate starts to work
8UXFKRPLHQLH
8ZDJD3U]HGSLHUZV]\PXUXFKRPLHQLHPX]XSHáQLüSR
]LRPROHMX
HP1100S / HP1300S
8UXFKRPLHQLHVLOQLND5\V
8VWDZLüVVDQLHZSR]\FML21ZáąF]RQHSU]\JRUąF\P
VLOQLNXQD23(1
2WZRU]\ü]DZyUEHQ]\Q\
3U]HVXQąüGĨZLJQLĊJD]XGRSR]\FMLVWDUWRZHM
8VWDZLüSRNUĊWáRVWDUWXZSR]\FML21ZáąF]RQHVLOQLH
SRFLąJQąü]DNDEHOUR]UXFKRZ\
3U]HVXQąüGĨZLJQLĊJD]XGRSR]\FMLURERF]HMXU]ąG]H-
QLHZLEUDF\MQHXUXFKRPLRQH
6LOQLNSUDFXMHSRZROLRWZRU]\üVVDQLH
3U]HVXQąüGĨZLJQLĊJD]XGRSR]\FMLURERF]HM
0DV]\QDXUXFKRPLRQD
To Next Page
Loading...
