25
+36:áąF]HQLHVLOQLND5\V
8VWDZLüVVDQLHZSR]\FMLZáąF]RQHMRWZRU]\üSU]\UR]-
JU]DQ\PVLOQLNX
'ĨZLJQLĊJD]XXVWDZLüZSR]\FMLVWDUWRZHM
:áąF]\üZáąF]QLN
0RFQRSRFLąJQąüVWDUWHUEDODQVHUDOLQNRZHJR
*G\VLOQLNG]LDáD±SRZROLRWZLHUDüSU]HSXVWQLFĊVVDQLD
'ĨZLJQLĊJD]XXVWDZLüZSR]\FMLURERF]HM
3á\WDZLEUDF\MQDUR]SRF]\QDSUDFĊ
=DWU]\PDQLHVLOQLND
8VWDZLüGĨZLJQLĊJD]XZSR]\FMLVORZSRZROQH
:\áąF]\üPDV]\QĊ
3UDFDSá\W\ZLEUDF\MQHM
8ZDJD1DOHĪ\XĪ\ZDüREXZLDRFKURQQHJRZFHOX]D
SRELHJDQLDRNDOHF]HQLRP
3U]HG XUXFKRPLHQLHP PDV]\Q\ QDOHĪ\ V]F]HJyáRZR
]DSR]QDüVLĊLQDVWĊSQLHSU]HVWU]HJDüLQVWUXNFMLEH]SLH-
F]HĔVWZD
1DOHĪ\UyZQLHĪSU]HVWU]HJDüRERZLą]XMąF\FKRJyOQRNUD-
MRZ\FK]DVDGGRW\F]ąF\FKSUDF\]XU]ąG]HQLDPLZLEUD-
F\MQ\PLQDGURJDFKLWHUHQDFKSXEOLF]Q\FK
2VRE\WU]HFLHG]LHFLL]ZLHU]ĊWDQLHSRZLQQ\]QDMGRZDü
Z]DVLĊJXJURĪąFHJRQLHEH]SLHF]HĔVWZD
1DOHĪ\ VSUDZG]LüF]\QD WHUHQLH SUDF\XU]ąG]HQLDQLH
]QDMGXMąVLĊQLHSRZRáDQHSU]HGPLRW\DZSU]\SDGNXLFK
REHFQRĞFLXVXQąü
3U]HGRGHMĞFLHPRGPDV]\Q\QDOHĪ\QDSU]yGEH]Z]JOĊG-
QLHZ\áąF]\üVLOQLN
HP800S, Starting the motor: Fig. 3.5, 3.6, 3.7, 3.8
1 Close the choke (but leave it open if the motor is
already warm)
2 Move the gas lever to the starting position
3 Set the start switch to “on”
4 Pull the starter cord strongly
5 Motor is running – slowly open the choke
6 Move the gas lever to the working position
7 Plate compactor will begin to function
Stopping the motor
1 Set the gas lever to slow.
2 Switch machine to OFF.
Operating the vibratory plate
Attention: Wear safety shoes in order to avoid injuries.
• Before putting the machine into operation it is im-
portant to study and observe the safety instructions.
• Observe the national regulations for working when us-
ing the vibratory plate on public ground or roads.
• Keep persons, children and animals away from the
dangerous area.
• Search the working area for foreign bodies and re-
move them.
• When leaving the vibratory plate, always shut down
the motor.
To Next Page
Loading...
Need help?
General
