Scheppach HP800S

27
.RQVHUZDFMD
3U]HG SRGMĊFLHP SUDF QDSUDZF]\FK OXE NRQVHUZDF\MQ\FK
QDOHĪ\]DZV]HZ\áąF]\üVLOQLN
HP1100S / HP1300S
1DSLĊFLHSDVNDNOLQRZHJR5\V
1DFLąJSDVNDNOLQRZHJRPXVLE\üNRQWURORZDQ\LUHJXORZD-
Q\SRNDĪG\FKSLĊFLXJRG]LQDFKSUDF\XU]ąG]HQLD
 :FHOXUHJXODFMLQDFLąJXSDVNDQDOHĪ\SROX]RZDüĞUXE\
$PRFXMąFHVLOQLNDSRREXVWURQDFK5\V
 1DVWĊSQLHSROX]RZDüGZLHQDNUĊWNL]DEH]SLHF]DMąFH%L
QDFLąJQąüSLąüSDVHNNOLQRZ\SU]\SRPRF\REXĞUXE&
 3RZ\NRQDQLXW\FKF]\QQRĞFLPRFQRGRNUĊFLüĞUXE\$L
QDNUĊWNL]DEH]SLHF]DMąFH%5\V
HP800S
1DFLąJDQLHSDVNDNOLQRZHJR5\V
.DĪGRUD]RZRSRJRG]LQDFKSUDF\QDOHĪ\SRQRZQLHQDFLą-
JQąüSDVHNNOLQRZ\
 :FHOXQDFLąJQLĊFLDSDVNDNOLQRZHJRQDOHĪ\SROX]RZDü
]DPRFRZDQLHVLOQLNDSRREXVWURQDFK]DSRPRFąĞUXE
$5\V
 1DVWĊSQLHQDOHĪ\SROX]RZDüQDNUĊWNĊ]DEH]SLHF]DMąFą
%LQDFLąJDüSDVHNNOLQRZ\]DSRPRFąQDNUĊWNL&
 3RQDFLąJQLĊFLXSDVNDNOLQRZHJRQDOHĪ\GRNUĊFLüĞUX-
E\$RUD]QDNUĊWNĊ]DEH]SLHF]DMąFą%5\V
Maintenance
Before starting maintenance or repair work, always shut
down the motor.
HP1100S / HP1300S
Tensioning the vee-belt. Fig. 4.1, 4.2
The vee-belt must be re-tensioned after five operating
hours.
1 For tensioning the vee-belt, the bolts A of the motor
fixing must be released on both sides. )LJ
2 Now release the two counternuts B and tension the
vee-belt with both bolts C.
3 After tensioning the vee-belt, firmly retighten the
bolts A and the counternuts %)LJ
HP800S
Tensioning the vee-belt. Fig. 4.3, 4.4
After 5 hours in use, the fan belt must be tightened.
1 To tighten the fan belt, the screws A on both sides of
the motor housing must be loosened. ( Fig. 4.3, 4.4 )
2 Now loosen the locknut B and tighten the fan belt
with the nut C.
3 After tightening of the fan belt 4, tighten the screws
A and the locknut B again. Fig. 4.4