www.scheppach.com
GB
|
13
Explanation of the symbols on the device
Read the whole text of the operating instructions thoroughly before start up.
Wear eye protection when working with the device.
Wear safety shoes when working with the device.
Wear work gloves when working with the device.
Adjust the cutting blade so that the disconnect lever is approx. 15° above the horizontal.
Do not remove protective devices.
Do not reach into the moving parts of the stone cutter.
Do not push the cutting lever in the opposite direction during operation.
Watch out for ying parts.
Always place the stoneware in the middle of the device.
To Next Page
Loading...
Need help?
General
