www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
33
12. Troubleshooting
Troubleshooting
m CAUTION!
m CAUTION!
Important hint in case of sending the equipment to a service station:
Fault Possible cause Remedy
Loud while running, ma-
Screws are loose
Blade fasteners are loose
Blade is unbalanced
Check screws
Check blade fasteners
Replace blade
Engine does not start
Brake lever not pressed
Speed lever in wrong position
Spark plug is defective
Contaminated fuel
Cold environment
Press brake lever
Check setting
Replace spark plug
Push the primer button (if present)
Contact authorised customer service
Spark plug is soiled
Clean the spark plug
Uneven mowing results
Blade is blunt
Cutting height is too low
Sharpen the blade
Set correct height
the grass
Cutting height is too low
Blade is worn
Basket is clogged
Set correct height
Replace the blade
To Next Page
Loading...
Need help?
General
