www.scheppach.com
46
|
GB
15. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Loud while running, machine
vibrates heavily
Screws are loose Check screws
Blade fasteners are loose Check blade fasteners
Blade is unbalanced Replace blade
Engine does not start
Brake lever not pressed Press brake lever
Spark plug is defective Replace spark plug
Fuel tank is empty Rell with fuel
Contaminated fuel Empty fuel tank and ll with
clean fuel
Cold environment Push the primer button (if
present)
Engine faulty Contact authorised customer
service
Engine runs unsteadily
Air lter is soiled Clean the air lter
Spark plug is soiled Clean the spark plug
Uneven mowing results
Blade is blunt Sharpen the blade
Cutting height is too low Set correct height
Unsatisfactory bagging of the grass
Cutting height is too low Set correct height
Blade is worn Replace the blade
Basket is clogged Empty the basket
To Next Page
Loading...
