www.scheppach.com
20
|
GB
Explanation of the symbols on the device
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace
proper accident prevention measures.
Read the operating manual to reduce the risk of injury.
Do not grind with the side surfaces of the cutting wheel.
Do not use damaged cutting wheels. Check the cutting wheels for chipping and cracks
before each use.
Wear hearing protection. Excessive noise can result in hearing damage.
Wear a mask. Dust, which is harmful to health, can be generated when working on wood
and other materials. Never use the device to process materials that contain asbestos.
Wear eye protection. Sparks or fragments, chips and dust generated during work can
cause blindness.
Wear protective gloves while working with the device.
m Attention! Points in this operating manual that impact your safety have been marked with this note.
m Caution! A failure to observe these instructions can result in light to moderate injuries.
m Warning!
A failure to observe these instructions poses a danger of death or the risk of serious
injuries.
To Next Page
Loading...
Need help?
General