Scheppach ROBOCUT XXL900

www.scheppach.com
GB
|
25
6. Technical data
Robot mower
Voltage 20 V
Idle speed n
0
2800 rpm
Cutting width 18 cm
Cut height 20-60 mm
Cutting height positions 9
Area 900 m²
Max. incline 35%
Tightest possible passage 0.8 m
(App) control
Bluetooth
®
Operating frequency band 2.4-2.48 GHz
Maximum transmitted power 8.61 dBm
WiFi
Frequency range of the
WLAN module
2.4-2.48 GHz
Max. radio frequency power
of the WLAN module
18.39 dBm
AK4.0-RC-20Li rechargeable battery
Type Li-Ionen
Voltage 18V (max 20 V )
Capacity 4000 mAh
Power 72 Wh
Charge time approx. 110 min
NT3.0-RC-20Li mains power unit
Voltage (input) 100-240 V~
Frequency 50-60 Hz
Power consumption 76 W
Voltage (output) 20 V
Charge current 3 A
IP protection classes
Robot mower IPX5
Charge station IPX4
Mains power unit IP67
Total weight (net) approx. 8 kg
Technical changes reserved!
m IMPORTANT:
This charging unit is suitable exclusively for charging
the product type RoboCut XXL 900.
• Keep the rechargeable battery out of the reach of
children.
• Keep the original product description safety for fu-
ture reference.
• Dispose of the product properly.
• Keep the charging unit clean. Dirt results in a risk
of electric shock.
• Check the charging unit, cable and plug before
every use. Do not use the charging unit if you de-
tect any damage. Never open the charging unit
yourself and only have it repaired by qualied
specialists and only with original spare parts. A
damaged charging unit, cable and plug increases
the risk of an electric shock.
• Always check that the mains voltage concurs with
the voltage specied on the type plate of the charg-
ing unit.
• Never use the charging unit if the cable, plug or
the product itself are damaged due to external
inuences. Take the charging unit to the nearest
specialist workshop.
• Never open the charging unit. Take the charging
unit to the nearest specialist workshop.
m ATTENTION!
This power tool generates an electromagnetic eld
during operation. This eld can impair active or pas-
sive medical implants under certain conditions.
In order to prevent the risk of serious or deadly in-
juries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
machine.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Before performing setting or maintenance work, re-
lease the start button and pull out the power plug.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the “Safety In-
structions” and the “Intended Use” together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual. This is how to ensure that
your machine provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.