ALL SCHERTLER® PRODUCTS ARE COVERED BY A LIMITED TWO-YEAR WARRANTY (FROM THE DATE OF PURCHASE) AGAINST MANUFACTURES
DEFECTS. DETAILS CAN BE OBTAINED FROM YOUR LOCAL DEALER/REPRESENTATIVE. SCHERTLER SA STRONGLY BELIEVES IN “COMMON SENSE”
AND THUS, MISUSE OF OUR PRODUCTS ARE NOT COVERED UNDER RIGHTS OBTAINED THROUGH OUR WARRANTY POLICY OR THAT OF INTERNA-
TIONALLY RECOGNIZED TERMS AND CONDITIONS.
SCHERTLER SA IS CONSTANTLY AIMING TO IMPROVE ITS RANGE OF PRODUCTS THEREFORE, SCHERTLER SA RESERVES THE RIGHT TO AMEND
PRODUCT SPECIFICATIONS WITHOUT NOTICE.
THE SCHERTLER® NAME/LOGO ARE REGISTERED TRADE-NAMES/ TRADEMARKS OF SCHERTLER SA, SWITZERLAND.
All SCHERTLER® PRODUCTS ARE OF PROPRIETARY TECHNOLOGY AND COVERED BY ONE OF MORE WORLDWIDE PATENTS.
3.1. DESCRIPTION
Box two way, bass reflex
3.2. ENCLOSURE SECTION
Construction: Plywood
Weight: 6.3 kg
Dimensions: 27 x 18 x 28 cm
3.3. AMPLIFIED SPEAKER SECTION
Freq. resp.: 50Hz - 30kHz (-3dB)
Sensivity: 88.4 dB
SPL max: 103.4 dB
3.4. TECHNICAL SPECIFICATIONS INPUTS
MIC-IN
Connector: XLR balanced / JACK 6.3mm unbalanced
Sensivity: -52dB
Impedance: 4.7kohm
3.5. TECHNICAL SPECIFICATIONS OUTPUTS
LINE OUT:
Connector: JACK 6.3mm unbalanced
Level: 0dBu
Impedance: 100ohm
DI OUT
Connector: XLR balanced
Level: -15dBu
Impedance: 200ohm
AUX OUT
Connector: JACK 6.3mm unbalanced
Level: 0dBu
Impedance: 100ohm
3.6. INTERNAL EFFECT (digital reverb)
Freq. resp.: 200Hz - 10kHz (-3dB)
Delay time: c.a. 30ms
Reverb time: c.a. 2.8 s
3.7. COMPONENTS
To Previous Page
Loading...
