To Next PageTo Next Page
Need help?Do you have a question about the Schletter FlatGrid and is the answer not in the manual?
Key safety precautions for installation, handling, and potential hazards during the use of the system.
Covers roof conditions, spacing, slope limits, load capacity, and module arrangement for proper installation.
Details on extending base profiles using internal connectors and self-drilling screws.
Guidance on adhering structure protection mat strips to base profiles after removing protective film.
Instructions for parallel placement and spacing of base profiles on the roof according to static specifications.
Steps for inserting the one-click module and square nut, and fastening Rapid 2+ L with a screw and shim.
Methods for securing module fields against slipping on sloped roofs using horizontal fastening or tension connectors.
Procedure for inserting module support profiles onto the lower screw channel and aligning/tightening them.
Distributing ballast according to planning documents and ensuring even load distribution on the base profile.
Positioning modules, installing cables, and fastening with Rapid16 module clamps at specified points and torque.
General| Brand | Schletter |
|---|---|
| Model | FlatGrid |
| Category | Solar panel |
| Language | English |
