Schluter Systems DH E RT5 / BW - Engineer Settings

PAGE 44
© 2018. All rights reserved. Used under license by Schlüter-Systems KG.
Engineer Settings
This menu contains all the parameters that must be set by the engineer during ther-
mostat installation or service. The menu contains the following options:
• Adaptive Function
• Open Window
• Sensor Application
• Sensor Type
• Floor Sensor Calibration
• Room Sensor Calibration
• Temperature Scale
• Factory Reset
• EN 50559
Sensor Application
Adaptive Function
Open Window
Factory Reset
Temp. Scale
Room Sens. Calibr.
Floor Sens. Calibr.
Sensor Type
EN50559
>
<
Contents