schmersal RSS 36-D-ST - Product description; 2.1 Ordering code; 2.2 Special versions; 2.3 Purpose

F
Further technical information can be found in the Schmersal catalogues or in the online catalogue on the Internet:
products.schmersal.com.
2 Product description
2.1 Ordering code
产品描述:
RSS 36 (1)-(2)-(3)-(4)
(1)
无 标准编码
I1 独立编码
I2 单独编码，可重新示教
(2)
无 without diagnostic function (only on request for ST5)
D 带诊断输出
SD with serial diagnostics (only for ST)
(3)
无 无闭锁
R 带闭锁，锁定力约 18 N
(4)
ST 连接插头M12，8芯
ST5 Connector plug M12, 5-pole
2.2 Special versions
For special versions, which are not listed in the ordering code, these specifications apply accordingly, provided that
they correspond to the standard version.
2.3 Purpose
This non-contact, electronic safety sensor is designed for application in safety circuits and is used for monitoring the
position of movable safety guards. In this application, the safety sensor monitors the position of hinged, sliding or
removable safety guards by means of the coded electronic actuator.