Operation
121
Switching off the
AutoStore
Switch off the
AutoStore
function by:
l Setting the storage interval (Int 1) to OFF or
l Switch the conductivity meter off and on again.
4.4.3 Outputting the data storage
The contents of the data storage can be output to the:
l display
l interface
1 Press the <RCL> key repeatedly until
Sto disp
ap-
pears on the display.
2 Press the <run/enter> key.
A measured value appears on the display.
The I. D. number of the data record appears for ap-
prox. 2 s.
Outputting to the
display
To Next Page
Loading...
