Operation
136
18 Set today’s date by pressing <▲> <▼>.
19 Confirm with <run/enter>.
The date (month) flashes on the display.
20 Set the current month by pressing <▲> <▼>.
21 Confirm with <run/enter>.
The year appears on the display.
22 Set the current year by pressing <▲> <▼>.
23 Confirm with <run/enter>.
The hours flash on the display.
24 Set the current time by pressing <▲> <▼>.
25 Confirm with <run/enter>.
The minutes flash on the display.
26 Set the current time by pressing <▲> <▼>.
27 Confirm with <run/enter>.
The instrument changes automatically to the conduc-
tivity measuring mode.
Date and time
To Next Page
Loading...
