15
• When you push the face shield open, it may well travel beyond the urban
position
• but it is easy to nd this position by moving it downwards again. The face
shield mechanism requires no additional lubrication. The face shield can be
operated at any time irrespective of the position of the sun visor.
CLOSING THE FACE SHIELD
To close the face shield, grip the nger tabs at
top left and right and press the face shield down
with one movement until it audibly locks into
place.
REPLACING THE VISOR SHIELD
Changing the face shield is easy to do without tools using the convenient
EasyChange mechanism. To replace the face shield, it is helpful to place the
helmet on a at surface or on your lap while seated.
Removing the face shield
1. Move the face shield into the
uppermost locked position.
To Next Page
Loading...
Need help?
General
