41
2. After cleaning, re-attach the ventilation
cowl by sliding it into the mechanism and
applying pressure until it clicks back into its
original position.
3. Then use the ventilation slider to set to an
optimum position for ventilation.
6. RETENTION SYSTEM
The metal components of the retention system do not require maintenance.
7. STORING THE HELMET
Store the helmet in the helmet bag supplied in a dry, well-ventilated and stable
place. Always position the helmet so that it cannot fall to the oor. Damage that
occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.
To Next Page
Loading...
