22
Tip:
The sun visor holders should remain in the lower position while you install
the visor.
Fitting the sun visor
1. Put the sun visor between the snap
connections and t it on to the locating pegs
on one side and then on the other.
2. Position the sun visor between helmet
inner and outer shell and lower it with the
operating slide.
3. For safety, check that the sun visor
mechanism is functioning correctly.
13. INNER LINING
The interchangeable, washable and seamless inner lining of the C4 BASIC
ensures a secure and comfortable t, as well as improved helmet ventilation.
The high-comfort cheek pads ensure that the helmet ts comfortably around
the cheeks, and the head pad provides an optimal t all around the head.
The head pad sits comfortably on the head without covering the ventilation
channels.
The internal lining consists of skin-friendly materials throughout, particularly in
areas that come in contact with the head. A soft, breathable material known
as Coolmax®, which is fast-drying and conducts heat eciently is used for the
padding, as well as a special anti-bacterial low-odour fabric.
C. THE HELMET
To Next Page
Loading...
Need help?
General
