21
Note:
Only use the slide to operate the sun visor.
Caution:
Never ride in the dark or in conditions of poor visibility with the sun visor
down. Always raise the sun visor before entering a tunnel.
Caution:
Riding without the face shield or with an open face shield can result in
injury to the eyes and face from stones, dust, insects and other ying
objects. The sun visor, when lowered, will oer a certain amount of
protection from light impact from stones or insects but does not provide
protection against all hazards.
REPLACING THE SUN VISOR
The sun visor can be replaced without tools.
Tip:
To avoid ngerprints and scratches, use a soft, clean cloth (we recommend
a microbre cloth) to hold the sun visor when removing or installing it.
Tip:
Changing the sun visor is easier when the chin section is open and locked
in place. It is also helpful if you place the helmet on a at surface or on
your lap while seated.
Note:
Try to prevent the sun visor coming into contact with the helmet's inner
shell when removing or tting it.
Removing the sun visor
1. Open and lock the chin section in place.
2. Pivot the sun visor down.
3. Bend the middle snap connection with
locating pegs gently outwards until the sun
visor is released from the visor holder.
4. Repeat this step for the other side.
To Next Page
Loading...
Need help?
General
