38
1. OUTER SHELL
To clean the helmet shell, you can use water, soap or one of the commonly
available motorcycle shampoos, cleaners, polishes, plastic cleaners or cleaning
uids. Using water and soap is usually sucient. Make sure when using the
other cleaning materials that these do not come into contact with the face
shield, since they can cause damage to the visor and its coating.
Note:
Never use motor fuel, thinners or solvents to clean the helmet. These
substances can cause serious damage to the helmet with no external
signs. The full safety function of the helmet can then no longer be
guaranteed.
2. CHIN SECTION
Please check the functionality of the chin part at regular intervals.
Caution:
Alterations to the strap buckle are not permitted. In particular, you should
not oil or grease the metal components of the chin section lock. Repairs
may only be carried out by the SCHUBERTH Repair Service.
3. FACE SHIELD AND SUN VISOR
OUTER SURFACE OF THE FACE SHIELD
Use a soft cloth and a mild soap solution (< 20 °C) to remove dirt from the
outside of the face shield. To dry the face shield, use a lint-free cloth and apply
gentle pressure.
G. MAINTENANCE AND CARE
To Next Page
Loading...
Need help?
General
