EasyManuals Logo

SCHUBERTH C4 BASIC User Manual

SCHUBERTH C4 BASIC
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
EN
17
3. Check the function of the visor mechanism
by closing the visor once and opening it as
far as possible.
ANTI-FOG LENS
Fitting
1. Lay the anti-fog lens in the face shield in such
a way that one side of it is already slotted into
the locking pin.
2. Now grasp the other side of the antifog lens by
its upper and lower transverse edges and use
your index nger to gently press the end of the
visor into a slight "S" shape. Now you can easily
guide the slot over the locking pin and release
the anti-fog lens into place.
3. The anti-fog lens should now be
positioned in the face shield with its
lower edge parallel to the lower edge of
the face shield. If you need to change
the positioning of the anti-fog lens, use
the balls of your thumbs to gently bend
the face shield apart until the inner visor
can be adjusted as required.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SCHUBERTH C4 BASIC and is the answer not in the manual?

SCHUBERTH C4 BASIC Specifications

General IconGeneral
BrandSCHUBERTH
ModelC4 BASIC
CategoryMotorcycle Accessories
LanguageEnglish

Related product manuals