SCHUBERTH C4 BASIC User Manual

EN
25
2. Undo the two buttons in the forehead area and
remove the head padding.
INSTALLATION INNER LINING
INSTALLATION HEAD PAD
1. Using the red pins, attach the head padding
to the two connectors in the forehead area
and the one at the back of the helmet.
2. Insert the plastic retention aps with round
holes over the pins sewn into the rear
section of the cheek pad and ax them
using the red snaps.

SCHUBERTH C4 BASIC Specifications

General

Brand	SCHUBERTH
Model	C4 BASIC
Category	Motorcycle Accessories
Language	English