27
INSTALLATION NECK PAD
1. Feed the neck pad into the tracks on each
side
2. Attach the plastic hooks between the
helmet shell and the lining
3. Relocate the neck pad onto its xing
between the helmet shell and lining, and do
up the buttons on the front tab of the neck
pad.
Note:
Ensure that the A.R.O.S. straps are not twisted.
Caution:
Never ride when parts of the inner lining have been removed.
Caution:
Excessive heat (e.g. exhaust heat) can cause damage to the inner lining!
To Next Page
Loading...
